Make sure your water of the Avalon Water Cooler dispenser lasts a long time and provides healthful, great tasting water cold or hot water, you need to keep it clean. The easiest way to do this is to clean the Avalon Water Cooler every time you change the bottled water, but you can also set up a reminder on your calendar to do it every 5 to 6 months.
Why we need cleaning the Avalon Water Cooler?
- Prolong the lifetime of Avalon Water Cooler: The machine is recommended that the unit be cleaned and sanitized manually about every five to six months once time.
- The outside of the unit has been disinfected: Sometimes you should use a disinfectant of your choice to wipe down the outside of the Avalon Water Cooler. And a disinfectant can be purchased separately from near your local store.
- The inside of the unit also outside: The machine has been disinfected prior to departing from the factory. But, your store you bought it. And it is recommended to rinse and drain the unit prior to installation.
Advantages when we use the Avalon Water Cooler
- The safety lock: Child will safe design granted when them drink with hot water function.
- Three different water temperatures: Very usefull and depending on your preferences.
- Low power: Avalon Water Cooler machine accredited due to its low power consumption.
- Alert system: If Empty bottle indicator lets you know when you need to change the water bottle.
About quality product:
- Covered by a 1 to 2 years warranty,
- Self-clean ozone function.
- No water cooler leasing fees.
- No need to have a drain installed.
- No monthly rental fees.
- No plumber required.
- No water jug delivery fees or buy new water jug.
How to clean your avalon water cooler?
Prepare some accessories to dismantling equipment of the machine. Before cleaning, make sure that the cooling switch and heating switch are turn off and unplug the machine.
You need to prepare your cleaning kit like:
- Citric acid crystal
- a screwdriver
- a stirrer
- a scrubbing brush latex glovers disinfection wipes
You also want to grab your own bucket for draining the cooler and mixing the cleaning solution to start cleaning your cooler
Step 1: If your Avalon cooler water still have water, so you need to locate drain plug on the back of the unit and make sure that you have your bucket handy for this so you're going to remove the screw and the drain cover so that way we can access the plug. Once you're removed the cap to the pluck to drain, you can go a head and remove the plug.
Step 2: One your unit has completed draining you can go ahead of the machine and clip the plug back in place but you can leave the cap in the screw off. And for now as we will be draining the unit again.
For now, you want to open up the cooler to make sure that all the water has been drained. So to do that you will remove the two screws near the top of the cooler
Then, we're going to left the cover and remove the cold tank lid. Important make that all the water has been drained from the unit
Inside of the unit you can see this round piece here is your cold tank separator, you want to remove this so that you can clean the tank properly so you can just twist it a little bit as you lift it out of place.
Step 3: Front of the cooler so we're gonna drain that water from your cold spout and hot spout and you can allow the water to flow until it completely stops dispensing.
Step 4: Once you're drained your cooler completely you're now ready to mix together your cleaning solution so that you can pour it into your cooler to do that your definitely want to grab your bucket you also are going to want to add 4 liters or about 16cups of water to your backet and you're going to want to mix it with your bag of citric acid crystals.
So now we going to a gead and add to your bucket.
Step 5: Add it to your cold tank and wait to 10 to 15 minutes and drain it. And you're ready to drain the water out of the cooler and Finally you do it one to twice times with water clean.